Skip to main content
Skip to main content
Mobility Aftermarket Africa
0 684 300 108

DAS 3000 S10 – Universal computer based calibration and adjustment device

(positioning related to vehicle center line)

DAS 3000 S10 with VW target for front camera calibration

DAS 3000 S10 with VW target for front camera calibration

DAS 3000 S10 with integrated Multi-Target-Shop container

DAS 3000 S10 with integrated Multi-Target-Shop container

DAS 3000 S10 scope of delivery including distance measurement aid

DAS 3000 S10 scope of delivery including distance measurement aid

Precision measurement bar for vehicle specific targets

Precision measurement bar for vehicle specific targets

Pitch angle adjustment

Pitch angle adjustment

DAS 3000 S10 with VW target for front camera calibration
DAS 3000 S10 with integrated Multi-Target-Shop container
DAS 3000 S10 scope of delivery including distance measurement aid
Precision measurement bar for vehicle specific targets
Pitch angle adjustment

Following OEM requirements for collision repairs, maintenance and servicing - the sensors of an advanced driver assistance system must be readjusted and calibrated accurately.

The DAS 3000 S10 conducts precise calibration of a front Camera.

With quick setup, innovative multi-function-fixture, robust but maneuverable design, and a broad selection of adjustable calibration targets, the DAS 3000 is ready for multiple applications within the automotive workshop. Bosch diagnostic scan tools as well as diagnostic software ESI[tronic] Evolution in combination with DAS 3000 ensure a proper calibration of the Active Cruise Control (ACC), Forward Collision Warning (FCW) and Lane Assistance system (LDW/LKA).

More Information

DAS 3000
YouTube

See how to calibrate front cameras and radar sensors of modern Advanced Driver Assistance Systems (ADAS) easily and quickly with the Bosch DAS 3000. The video shows positioning on the driving axis with DAS 3000 S20.

  • Controlling vehicle specific calibration easily with diagnostic software ESI[tronic] Evolution in combination with computed workflows and Target positioning: conform with OEM requirements, best efficiency and future proof (i.e. LIDAR)
  • Trolley with universal fixture designed for installation of multiple Target boards: rapid and accurate 1-point, 2-point and sequential calibrations
  • Scope of delivery includes a XL multi-function board: VW Group Camera calibration pattern and Radar reflector in one
  • Versatility scope of delivery includes a precision measurement bar designed for magnetic fixation of components from Bosch Multi-Target-shop: For rapid and accurate placement of Target boards
  • Integrated cameras and software workflows measure the distance to the vehicle and line-up to thrust line (driving axis) fully digital: guarantees a fast and accurate positioning including traceability
  • Universal fixture with integrated Pitch angle fine adjustment on top of device: For comfortable and ergonomic adjustment
  • Universal fixture with integrated height offset and roll angle adjustment: efficient pre-setting for dedicated working bays (i.e. above floor installed lifts)
  • XL Multi-function board covers all OEM Radar mounting heights and requires just a lateral rough positioning: simplifies the setup significantly, best liability.
  • Universal fixture offers Radar 3-point calibration (-2° / 0° / +2°): very ergonomic as operator can operate Diagnostic software and tiling mechanism in the same action range.
  • Robust trolley with extra-large wheels: For easy maneuverability and flexibility in busy workshop environments

Front Radar calibration

Optional / retrofitting

Front camera calibration with Multi-Target-Shop

Offset-adjustment for measurement
platforms:
0 – 300 mm
Height adjustment measurement bar:
700 mm – 1.850 mm
Traveling range target carrige:
+/- 800 mm
Predefined fixation of brackets holding XL-Target (Multi-Function board):
A) VW/Audi* car (1,200 mm) and Subaru Typ 3
B) VW/Audi* car (1,300 mm) and Subaru Typ 2
C) VW/Audi* SUV (1,400 mm) and Alfa-Romeo
D) VW/Audi* Transporter (1,850 mm)
*VW group

Working range computer vision positioning

Track width of vehicle:
1,650 mm – 2.200 mm
Distance measurement:
0,4 – 6 m
Virtual center line:
max. 6 m

Calibration device

Dimensions H x W x D:
2,090 mm x 2,030 mm x 730 mm
Net weight:
approx. 120 kg
  • Calibration device
  • XL multi-function board with VW pattern
  • Camera “virtual vehicle center line”
  • Distance measurement aid (post with reference panel)
  • Software package ADAS Positioning (download also via DDM)
Multi-Target-Shop
Starter kit
optional
Upgrade kit Radar (Includes crossbar
with integrated cameras and wheel clamps with targets.)
1 687 001 650
Product Brochure (PDF)
> Download
ADAS Help Center
> Learn more
Manuals, updates and information
> Learn more

Further products

Calibration targets for DAS 3000

Calibration targets
for DAS 3000

Read more
ESI

ESI[tronic] Software
Product overview

Read more
KTS 560_590 DCU 110 car cabin

ECU Diagnostic Tools
Product overview

Read more